







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Construction in Frisco, TX
Windows and doors are where most Frisco homeowners start, and for good reason: in a city built almost entirely since the 1990s, the original builder-grade units are now the weak point in an otherwise solid house. North Texas sun bakes west-facing glass for eight hours a day, hail comes at an angle that punishes seals and thresholds, and the slabs those windows sit in move with the clay underneath. We’re Barrett & Sons Construction, and on this page you’ll find how we handle Windows & Doors and roofing in Frisco, what the work runs, and the local conditions that decide whether a job goes smoothly. Call (877) 382-4108 for a free estimate.
Why Frisco Homes Are Different
Most of Frisco’s housing went up after 1990, so the problems here aren’t the problems of an older city. You’re not chasing rotting 1940s siding; you’re replacing windows that were never meant to last thirty summers, and roofs that took a direct hit from hail the original builder never planned for.
Two forces shape every job. The first is the ground. Frisco sits on Blackland Prairie clay that swells when it’s wet and shrinks when it’s dry, which is why post-tension slabs are standard and why you’ll see brick veneer stair-step cracks in neighborhoods off Main Street and along Teel Parkway. Doors go out of square when that movement works through a wall, and windows can bind in their frames. The second is the permitting calendar. Frisco is converting ranch land to subdivisions fast enough that inspection windows stay tight, so a scope that needs a permit has to be scheduled around the city’s schedule, not just ours. We pull permits on every eligible job and meet the inspector, because the inspector works for you, not for us.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Main Frisco Services
The two jobs Frisco homeowners call us about most often are exterior openings and the roof over their heads. Here’s what each one looks like once we’re on your lot.
Driveway & Pavers in Frisco
A paver driveway in a master-planned Frisco community has to clear the HOA design review before the first base course goes down, and the base itself has to be engineered for clay that will shift under a Texas summer. We excavate to depth, compact in lifts, and set Belgard or Tremron pavers with a polymeric joint sand that survives the freeze-thaw swings we do get in Collin County. Driveways that meet the tollway corridor townhomes often need tighter grading toward the street. If your current driveway has settled or the joints have heaved, we’ll tell you whether it’s a rebuild or a repair.
For details on materials and the full scope, see Driveway & Pavers in Frisco.

Fence Installation in Frisco
New-build Frisco lots often come with a builder fence good for about a decade before the posts start leaning, and Blackland Prairie clay is the reason. Posts set in that soil need to go below the active zone or they’ll rot in place. We set them in concrete at depth, and we build to your HOA’s approved height and style, whether that’s a six-foot cedar privacy fence on a production lot or an ActiveYards vinyl run along a townhome property line. We also check plat lines and easements before we dig, so you don’t learn about a utility conflict after the fact.
See the full scope at Fence Installation in Frisco.

Home Additions & ADU in Frisco
Adding on in Frisco means dealing with the city’s permitting timeline before you deal with framing. Setbacks, impervious cover limits, and lot coverage all get checked, and an ADU on a premium lot has its own rules about placement and utilities. Because the housing stock is young, most additions here are expanding rather than correcting, which makes the tie-in to the existing structure cleaner. We write the full scope and every allowance on paper before we start, and any price change comes as a written change order first.
Read more at Home Additions & ADU in Frisco.

Bathroom Remodeling in Frisco
Frisco’s 1990s and 2000s bathrooms were built to a production spec: standard tubs, builder tile, and a shower pan that’s approaching the end of its service life. Converting that tub to a walk-in shower is the most common request we get in the ZIP codes 75034 and 75035, and it’s a good one. We pull the permit, set the pan correctly with the slope the original never had, and waterproof before a single tile goes up. Premium fixtures and Cambria or quartz surfaces are available, all written into the scope.
See Bathroom Remodeling in Frisco for the full picture.
Kitchen Remodeling in Frisco
Kitchens in Frisco’s master-planned homes are frequently opened up, with a wall coming down between the kitchen and the living room, and that’s a structural conversation before it’s a design one. Once the framing is settled, KraftMaid cabinetry and Cambria countertops are the brands we install most here, both written into a scope with named allowances so nothing gets swapped later. Layout changes trigger a permit; we pull it and schedule the inspection around Frisco’s calendar. Every price change arrives in writing before work moves forward.
Full details are at Kitchen Remodeling in Frisco.
Windows & Doors in Frisco

Windows and doors in Frisco face conditions their builders never tested them against: hail that arrives at an angle and hammers the seal at the sill, and west-facing glass taking eight hours of Texas sun every afternoon. In the post-1990 production homes that make up most of Frisco, the original aluminum or vinyl units are often the first thing to fail, well before the roof. That’s the job we do most here, and it’s where a real energy rating and a proper install matter more than any sales pitch. You can read the full scope on our Windows & Doors page.
Window Replacement
Signs you need it
You feel heat radiating off the glass in August, the frames have gone wavy or won’t latch, or you can see condensation between the panes after a cold snap.
What it costs in Frisco
Window replacement in Frisco typically runs $4,500 – $15,000 depending on count, and impact window installation runs $8,000 – $25,000.
How we do it
We measure every opening, flash and seal the rough opening properly, set the new unit plumb and square, insulate the gap, and test latch and swing before we leave the room.
Energy-Efficient Windows
Signs you need it
Your summer electric bill climbs every year and the rooms facing west never cool down, even with the air running full out.
What it costs in Frisco
Energy-efficient window replacement in Frisco falls in the same $4,500 – $15,000 range for a standard whole-home replacement, with impact-rated units at $8,000 – $25,000.
How we do it
We match the glass rating to the exposure, install low-E units with proper argon fill and a sealed frame, and confirm the seal on every opening with a gap check before final walkthrough.
What Windows & Doors Costs in Frisco
| Item | Typical range in Frisco |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Energy-Efficient Windows (whole-home replacement) | $4,500 – $15,000 |
Do I need a permit to replace windows in Frisco?
Yes. Like-for-like replacement generally still requires a permit in Frisco, and any change to an opening size definitely does. We pull it and meet the inspector on the job, and the inspection gets signed before we close out.
Will new windows actually lower my cooling bill in Frisco?
They help, mainly on west-facing glass where the Texas afternoon sun does the most damage. Expect the biggest drop in rooms that currently overheat. Call (877) 382-4108 for a free estimate and a written scope.
Roofing in Frisco

Roofs in Frisco live under the same hail corridor that has made North Texas one of the most insured roofing markets in the country, and every roof here will see multiple hailstorms before it sees old age. Because the housing stock is largely post-1990s, most roofing work in Frisco is replacement and storm repair, not repair of ancient structures. That changes the questions: which shingle class, what the insurer will recognize, and how fast the deck can be made watertight again.
Roof Replacement & Installation
Signs you need it
Granules are piling up in the gutters, you can spot soft spots or visible hits from the ground after a hail event, or your roof is pushing twenty years in the Texas sun.
What it costs in Frisco
Full roof replacement in Frisco typically runs $8,000 – $20,000, with metal roof installation at $15,000 – $40,000.
How we do it
We tear off to the deck, inspect and replace any soft sheathing, install underlayment and ice-and-water shield at the valleys, then set GAF or CertainTeed shingles and clean the site.
Roof Repair
Signs you need it
You’ve got a ceiling stain after a storm, a few missing or lifted shingles, or a flashing leak around a chimney or vent boot.
What it costs in Frisco
Roof repair in Frisco usually falls between $400 – $1,800 depending on the damage, with tile roof repair at $600 – $2,500.
How we do it
We find the actual source of the leak, replace the damaged shingles or flashing, reseal the penetrations, and confirm water is running where it should before we leave.
What Roofing Costs in Frisco
| Item | Typical range in Frisco |
|---|---|
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
| Metal Roof Installation | $15,000 – $40,000 |
Does homeowners insurance cover hail damage to my Frisco roof?
Usually yes, if the damage is from a storm event rather than age. We document the damage with photos and a written scope you can hand to your adjuster. Call (877) 382-4108 for a free second opinion on any written estimate.
How long does a roof replacement take in Frisco?
Most single-family roof replacements here are done in a day or two once the permit and materials are in place. Scheduling can stretch if the city’s inspection calendar is tight after a storm; we build that into the timeline upfront.
Brands We Service in Frisco
We install GAF and CertainTeed roofing, Andersen and Marvin windows and doors, and Belgard, Tremron, and ActiveYards for exterior hardscape and fencing. We don’t claim stocked parts; materials are ordered and scheduled to your job. Turnaround on standard items runs a few weeks, with premium or custom lines longer. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Construction in Frisco, TX
| Service | Typical range in Frisco |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
| Metal Roof Installation | $15,000 – $40,000 |
| Kitchen Remodel | $14,000 – $45,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Home Addition | $45,000 – $130,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
In Frisco, price climbs with material grade (impact glass and metal roofing sit at the top), with the amount of structural change in a remodel, and with the permitting scope, since complex projects stay on the city’s inspection schedule longer. We price upfront in writing, and any change comes as a written change order before work happens.
Neighborhoods We Serve in Frisco
We work across Frisco’s master-planned communities and the newer custom-lot subdivisions, covering ZIP codes 75034, 75035, and 75033. We answer the phone 24 hours a day, and a live person takes your call. A free estimate anywhere in these areas usually books within a few days.
- Starwood and Newman Village
- Stonebriar and the neighborhoods near the Dallas North Tollway
- Wakeland and Panther Creek
- The older core near downtown Frisco off Main Street
Service Area – Cities Near Frisco
Frisco sits at the corner of Collin and Denton counties, and we work the surrounding towns as well. If you’re just up the road in Prosper, TX, over by the lake in Little Elm, TX, down toward The Colony, TX, or north of us in Paloma Creek South, TX, the same crew and the same written scope apply. Call (877) 382-4108 to set up a free estimate.
Serving Frisco, TX – Our Local Coverage Area
We serve Frisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Construction in Frisco
Yes, on every eligible job. Frisco’s inspection calendar can be tight given the pace of growth here, so we schedule around it and meet the inspector on site. The signed inspection is part of your job file.
We build the HOA design review into the front of the job, not the back. Before materials are ordered we confirm the approved style, colors, and height so your project doesn’t stall at the review stage. Bring us the guidelines and we’ll work from them.
Yes, across all three Frisco ZIP codes and the surrounding communities. Call (877) 382-4108 and a live person will confirm scheduling and set up your free estimate. There’s no trip charge inside the county.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local construction pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Frisco Customers Say
"He pulled every permit and had every inspection signed off. The last contractor we used told us permits were optional and I have been paying for that ever since."
- Redmond Cavanaugh"His sons run the crews and they were in our house for four months. Not once did I feel I had to be home to keep an eye on things."
- Camila Fuentes"Addition over the garage matched the original roofline and brickwork so closely that visitors do not realise it was added. He tracked down the closest brick he could find rather than settling."
- Gideon Stroud












