







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Driveway & Pavers Across Frisco
If you live on acreage around Frisco, your driveway is a different animal than the one on a subdivision cul-de-sac. Longer runs, county approach permits, gates, septic and well setbacks, and Blackland Prairie clay that moves under every load. We know that ground, and we know what it takes to build something on it that stays put. Barrett & Sons Construction has been doing this work since 1998, and our crew members bring up to 28 years of experience. Call (877) 382-4108 for a free estimate on your Frisco driveway, and a live person answers, any hour.
Why Barrett & Sons Construction Plano Is Frisco’s Preferred Driveway & Pavers Company

Frisco homeowners who’ve been burned by a national outfit quoting one price on the phone and handing over a different bill at the door tend to find us the second time around. We’re owner-operated. Tom Barrett and his sons run the crews, and you’ll see the same faces at the start of the job and at the final walk. That matters out here, where the work happens twenty minutes from everything and a contractor’s word is the only schedule that holds.
Every job includes permits pulled and inspections signed on the eligible scope. Every scope, allowance, and price change lands on paper as a written change order before a single load of base goes down. That’s not a slogan, it’s the part of the contract you read before you sign. And every completed job is covered by our written 90-Day Done Right Promise: if something’s not right, one call brings Tom back. Our local reputation in Frisco was built one driveway at a time, and it’s the kind of name you can look up. Tom publishes his name, his address, and his license number, so check it before you sign anything.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Driveway & Pavers Services in Frisco
Our Driveway & Pavers team handles the full range of hardscape work for Frisco properties, from a fresh paver drive on a premium lot to a repair that finally stops the apron from heaving.
Paver Driveways
Clay pavers and concrete pavers set on a properly compacted, test-rolled base are the most forgiving choice on Frisco’s expansive soils, because individual units flex instead of cracking as the ground moves. We set Belgard and Tremron pavers with a base detail engineered for the lot, not a one-size base depth pulled off a spec sheet.

Concrete Driveways & Concrete Work
Concrete is still the workhorse out here, and it performs on Frisco lots when the subgrade is cut and re-compacted after rough grading and the slab is designed for shrink-swell movement. We pour drives, aprons, and approach tie-ins, and we coordinate the county road-approach inspection where the parcel sits outside city limits.

Asphalt Driveways & Resurfacing
Asphalt makes sense on longer acreage runs and for resurfacing a drive that’s gone raveled at the edges. High summer heat and clay movement below mean the base and the edges do the real work. We build the base to hold, then seal it against the seasons.

Driveway Repair & Replacement
When a Frisco drive settles at the apron after a couple of wet seasons, the fix isn’t a cosmetic patch. We cut out the failed section, re-engineer the base and the drainage away from your pad and any detached shop or ADU slab, and re-lay the apron to a county-approved culvert and approach detail.
Trusted Brands We Service in Frisco
We install Belgard and Tremron pavers, and we’re glad to talk through which line fits a Frisco lot and which one just looks good in a catalog. We don’t claim to stock parts locally, and we won’t tell you we’ve got a yard full of pallets three miles away. What we do is order the right material for your job, schedule the haul so it lands when the base is ready, and quote it in writing. That’s how you avoid a surprise invoice at the end.
Common Driveway & Pavers Problems We See in Frisco Homes
Out here the failures are specific, and they have little to do with in-town subdivision work.
- Subgrade compacted over Blackland Prairie clay without test-rolling. Pavers and concrete heave and crack at the apron after the first wet season because the base was never properly re-compacted over the soil that moves under it.
- Approach culvert and tie-in installed without Collin County road-approach sign-off. On unincorporated parcels, the county controls the approach. Skip that approval and you’re looking at tear-out at inspection time.
- Equipment and material haul across septic fields or well setbacks. On acreage, access routes have to be laid into the scope. Drive a loaded tandem axle over a septic field and you’ll be fixing more than pavement.
- Drainage that flows back toward the pad, shop, or ADU slab. On an open lot, water has to leave the way it should. If it pools against a foundation or outbuilding slab, you’ll see it in the base within a season or two.
See the difference
Before
After
Before
After
Before
AfterPricing for Driveway & Pavers in Frisco, TX
A typical paver driveway installation in Frisco runs $7,000 – $18,000, while a standard concrete driveway lands at $4,500 – $12,000. A full driveway replacement with base re-work sits around $5,000 – $14,000, a paver patio runs $3,500 – $11,000, and a seal coat to protect the surface runs $250 – $700. Long material hauls, tight equipment access through gates, and county approach permitting are all scoped and priced before we quote, so the number you get is the number on the contract. Call (877) 382-4108 for a free estimate, and we’ll walk the lot with you.
| Service | Typical Frisco Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Concrete Driveway Installation | $4,500 – $12,000 |
| Driveway Replacement | $5,000 – $14,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Sealing | $250 – $700 |
What Makes a Frisco Acreage Driveway Different
Here’s the part no generic driveway page will tell you. Most of the acreage-tract driveways around Frisco sit on unincorporated Collin County parcels where the culvert and approach permit comes from the county, not from the city. Frisco itself runs a fast, production-builder permitting calendar geared toward new subdivision housing along the Dallas North Tollway. The county road-approach approval runs on its own clock. So the schedule for an acreage driveway is set by county sign-off, not by the city’s inspection queue. Get that order of operations wrong and the tie-in you built gets torn out at final inspection.
A typical acreage job goes like this: the drive settles and cracks at the apron within a couple of seasons because the subgrade was never cut and re-compacted after the lot was rough-graded. A qualified local pro cuts out the failed section, re-engineers the base and drainage away from the pad and any detached shop or ADU slab, and re-lays the apron to a county-approved culvert and approach detail. Before the first load arrives, we scope and price the long material haul and the tight equipment access in writing, along with gates, septic and well setbacks, and narrow drive corridors. Those are the line items that separate a Frisco acreage quote from an in-town one.
We Also Serve Cities Near Frisco
We handle Driveway & Pavers in Frisco and the surrounding communities, including Prosper, The Colony, Little Elm, and Paloma Creek South. Same approach on every one: scope in writing, county details handled, no surprise invoice at the end. If your lot is anywhere near Frisco, call and we’ll come walk it.
Serving Frisco, TX – Our Local Coverage Area
We serve Frisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Driveway & Pavers in Frisco
Yes. On unincorporated parcels, the culvert and road-approach permit comes from Collin County, not the City of Frisco. That means approval runs on the county’s schedule, not the city’s fast-track production-builder calendar, and we build that into the plan from day one. Call (877) 382-4108 and we’ll walk your parcel and confirm which authority applies.
Because the base wasn’t re-compacted over Blackland Prairie clay and the subgrade wasn’t test-rolled before the pavers went down. Frisco’s expansive clay moves with every wet-dry cycle, so a drive built on an unprepared base heaves and cracks at the apron within a couple of seasons. The fix is a proper cut-and-re-compact, not a cosmetic patch. Call (877) 382-4108 to schedule a free look at your drive.
Length, material haul distance, and equipment access drive the difference. A long Frisco-area run costs more than an in-town drive because of the extra base, the haul, and the access details like gates and septic setbacks, which we price in writing before we quote. Paver installation typically runs $7,000 – $18,000 and concrete $4,500 – $12,000, with acreage scope added on top. Call (877) 382-4108 for an exact number.
Drainage, the equipment access route, and the setback from your septic and well have to be laid out before the driveway or the slab goes in. You want the shop or ADU slab and the drive graded to drain away from each other, and the haul route set so a loaded truck doesn’t cross a septic field. We scope all of it in writing. Call (877) 382-4108 to plan the layout.
No. On Collin County parcels, the approach tie-in has to be inspected and signed off before it’s closed and finished, so we sequence the work around that inspection window. Closing early means tear-out and a second permit. When we pull permits, we get inspections signed on every eligible job. Call (877) 382-4108 to schedule your free estimate.
For a Frisco driveway built to hold up on this ground, call Barrett & Sons Construction Plano at (877) 382-4108 for a free estimate. Estimates are free, written change orders protect the price, and our written 90-Day Done Right Promise stands behind every job.
Written by the team at Barrett & Sons Construction.












