







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Frisco
Fence installation in Frisco runs $3,500 – $9,000 for most residential jobs, and the right crew can usually have your old panels down and new posts set within a few days of a signed contract. We work throughout 75034, 75035, and 75033, so we know the neighborhoods, the HOA rules, and the clay under your lot. If your cedar privacy fence is leaning after the last wind event, or you’re ready to upgrade to vinyl or aluminum, call (877) 382-4108 for a free written estimate.
Why Barrett & Sons Construction Plano Is Frisco’s Preferred Fence Installation Company

Frisco homeowners have heard the pitch before: a number quoted on the phone, then a different number inked on the contract. We do it differently. Every scope of work, every allowance, and every price change arrives in writing before a single post is set. That’s the same promise we’ve kept since 1998, and it’s why Frisco customers call us back for the next project.
Our technicians have up to 28 years of experience building and repairing fences across North Texas, and they know what a Frisco lot actually demands. They’ve pulled thousands of builder-original cedar posts set in shallow concrete in this clay. They’ve worked through HOA architectural reviews in the master-planned communities off the Dallas North Tollway. When a rear fence crosses a drainage easement the city controls, they know to stop and get it sorted before material gets ordered. That knowledge saves you from redoing a fence in three years.
Every eligible job includes permits pulled and inspections signed. Every completed fence is backed by our written 90-Day Done Right Promise. And a live person answers the phone 24/7, so you’re never leaving a message at a call center two time zones away.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in Frisco
Our Fence Installation team handles the full spread of residential and commercial work. Here’s what we build most often in Frisco.
Wood Fence in Frisco
Cedar privacy fence is the default in Frisco’s post-1990s neighborhoods, and much of it is now 15 to 25 years old. We replace builder-grade panels with properly set posts, deeper concrete, and cedar that’s rated for Blackland Prairie humidity swings. If your existing fence is still sound but the gates have stopped latching, a repair is often the smarter call.

Chain Link Fence in Frisco
Chain link still makes sense for side yards, pet enclosures, and light commercial lots in Frisco. We install galvanized and vinyl-coated options, and we set posts deep enough to hold through the seasonal clay movement that loosens short footings over time.

Vinyl Fence in Frisco
Vinyl privacy fence runs $3,500 – $9,000 in Frisco for typical residential lot sizes. It holds up well to the wet-then-dry cycle here, but North Texas hail can crack cheaper panels. We install ActiveYards products because the panels have a better track record through hail season.

Aluminum Fence in Frisco
Aluminum fence runs $4,000 – $10,000 in Frisco and is the common pick for pool enclosures and front-yard decorative work in the master-planned communities. The powder coat holds against summer heat, though gate hardware takes a beating and needs occasional attention.
Trusted Brands We Service in Frisco
We install ActiveYards vinyl fencing and coordinate matching gate hardware so the whole run looks like one job, not two. For ornamental runs we work with aluminum and iron systems that meet the design standards most Frisco HOA architectural committees require. We don’t claim to stock parts locally; what we do is spec the right material for your lot, order it, and have it on-site when the install window opens so your project doesn’t sit half-finished waiting on a delivery. Turnaround stays tight because we plan for it.
See the difference
Before
After
Before
After
Before
AfterCommon Fence Installation Problems We See in Frisco Homes
Frisco’s housing stock is overwhelmingly post-1990s, so fence work here is rarely a rebuild of a rotted-out antique. It’s replacing or upgrading builder-grade cedar privacy fence and entry gates that have taken 15 to 25 years of Blackland Prairie clay heave and North Texas hail, often on lots where the rear fence sits over a drainage easement the city controls. Here’s what we run into most:
- Leaning posts from shallow footings. Builder-original cedar was often set in concrete that didn’t reach deep enough for the shrink-swell clay. Season by season the movement loosens the post, and by year five or six the panel leans.
- Blown-over panels after hail and wind events. Frisco sits in a hail-and-tornado-prone corridor. When a spring storm rolls through, the weakest footing is the first panel to go down.
- Gates that stop latching. Hinges and latches wear faster in high summer heat, and a gate that swings out of alignment is usually a post problem, not a hardware problem.
- HOA and setback conflicts caught late. Frisco’s master-planned communities have architectural review requirements, and rear or side fences sometimes hit a setback or drainage-easement line nobody flagged before the quote was signed.
Pricing for Fence Installation in Frisco, TX

Here are the real ranges we see on Frisco jobs. A typical privacy fence install falls in the $3,500 – $9,000 range depending on linear footage, material, and gate count. What moves the number: total run length, whether old posts and concrete need to come out, material choice, gate hardware, and any HOA redesign or easement accommodation the job requires.
| Service | Typical Frisco Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
We give you a written, line-item quote before work starts. If something turns up mid-job (a setback conflict, an easement review), it becomes a written change order before we touch it. Call (877) 382-4108 for a free estimate. Ask about the $40 Off Any Repair Over $200 and the permanent 10% Senior & Veteran discount.
We Also Serve Cities Near Frisco
If you’re just outside Frisco, we cover the surrounding communities too. We handle Fence Installation in Frisco and nearby Prosper, The Colony, Little Elm, and Paloma Creek South. Same crews, same written contracts, same promise.
Serving Frisco, TX – Our Local Coverage Area
We serve Frisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Frisco

Frisco generally requires a permit for new fence construction, and most HOAs in the master-planned communities require separate architectural review. We handle the permit pull and coordinate the inspection. Call (877) 382-4108 and we’ll walk you through what your specific lot needs.
Most leaning Frisco fences come from builder-original posts set in concrete that didn’t go deep enough for the expansive Blackland Prairie clay. As the clay shrinks and swells seasonally, it works the post loose. The fix is to reset the post deeper with adequate concrete, not just to prop the panel back up.
Usually not without city approval, and sometimes not at all. Frisco controls certain rear drainage easements, and building over one can force a redesign after a quote is signed. We check the easement before we order material. Call (877) 382-4108 if you’re unsure about your lot.
Most Frisco residential fence installs fall between $3,500 and $9,000, with vinyl at $3,500 – $9,000 and aluminum at $4,000 – $10,000. Linear footage, removal of old posts, gate count, and any HOA redesign drive the number. Call (877) 382-4108 for a free written estimate.
A Frisco fence contract should spell out the exact linear footage, post depth and concrete spec, gate and hardware details, removal of old material, permit responsibility, HOA approval status, and any change-order terms. Ours includes all of that plus the written 90-Day Done Right Promise. Call (877) 382-4108 to get started.
Ready to price your Frisco fence? Call Barrett & Sons Construction Plano at (877) 382-4108 for a free estimate. We answer live, 24/7, and every quote comes in writing.
Written by the team at Barrett & Sons Construction Plano.












