Last updated November 18, 2026








Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fence Installation Warning Signs Every Homeowner Should Know
A fence contractor who offers to start tomorrow isn’t being efficient. He’s usually telling you he skipped the utility locate that Texas law requires before anyone turns a shovel. A hole through a gas line doesn’t care how good the cedar looked in the quote. In our experience around Plano, the worst fence crews don’t lead with bad materials either. They lead with vague paperwork, cash-only deposits, and a too-fast start date. This guide walks through the specific warning signs to screen for before a shovel touches your yard, from contract language to post-hole depth, so you can tell a straight answer from a sales pitch.
Quick Answer
The biggest fence installation warning signs are: no utility locate before digging, cash-only or oversized deposits, a refusal to pull permits, an oral quote with no written scope, and a suspiciously fast start date. In our experience, any one of these is a reason to slow down. Two or more and you should walk away, no matter how good the price looks.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Table of Contents
- Warning Sign 1: Starting Tomorrow With No Utility Locate
- Warning Sign 2: “We Don’t Pull Permits for Fences”
- Warning Sign 3: Vague Contract Language That Lets the Price Move
- Warning Sign 4: Bait-and-Switch on Materials
- Warning Sign 5: Proof of Insurance That Isn’t Real Proof
- Warning Sign 6: Post-Hole Depth and Concrete Curing in North Texas Clay
- Warning Sign 7: Cash-Only Deposits and Payment Schedules That Protect the Wrong Person
- Common Mistakes to Avoid
- When to Call a Professional
- Frequently Asked Questions
Warning Sign 1: Starting Tomorrow With No Utility Locate
Texas law requires anyone digging to contact the state’s one-call notification service (811) so utility lines can be marked before a shovel goes in. That locate usually takes two to three business days to process. A fence crew that says it can start tomorrow morning is telling you, directly or indirectly, that it plans to skip that step. Sometimes they’re just counting on you not knowing the rule.
A hit gas line or severed irrigation main isn’t a small repair. It can mean a call to the gas company, a permit inspector showing up, and a bill that lands on the property owner. In older Plano neighborhoods with homes from the 1970s and 1980s, utility lines aren’t always where the plat map suggests. The locate flags that for the crew before anyone breaks ground.
What a legitimate fence contractor does before install day:
- Submits the 811 locate request at least two to three business days ahead of digging.
- Confirms the markings are down before the crew touches a shovel.
- Walks the fence line with you to confirm the layout won’t cross any marked utilities.
- Handles any conflicts before the crew starts, not after a line gets hit.
If a contractor won’t wait for markings on a job that crosses underground utilities, that’s a warning sign about everything else that follows. For a fuller look at how we approach fence installation in Plano, we walk through the process step by step.
Warning Sign 2: “We Don’t Pull Permits for Fences”
Here’s the part people get wrong: a permit isn’t a hassle the contractor is doing you a favor by skipping. It’s the step that puts a city inspector’s eyes on the work, and it puts the liability on the right person. In Plano, fence height, setback from property lines, and placement near easements all fall under the city’s rules. If the crew builds it without a permit and it turns out to violate a setback, the property owner is the one who gets the notice to tear it out.
Hiring an unpermitted contractor means the homeowner carries the risk of a project that doesn’t meet code, can’t be easily sold with a clean disclosure, and can get flagged when a neighbor pulls a survey or a future buyer does a title check. In our experience, the crews that skip the permit are usually the ones cutting other corners too.
What legitimate permit work looks like on a fence job:
- A permit is pulled before installation rather than after a problem comes up.
- The inspector signs off at the end, and the paperwork stays with you.
- Height and setback questions get answered against the actual city code, not a guess.
- Any variance or easement issue gets identified before the posts go in.
The permit inspector works for you, not for the contractor. That’s why we like him. Ask for the permit number before the job starts, and confirm it with the city.
Warning Sign 3: Vague Contract Language That Lets the Price Move
This is where the surprise invoice gets born. A quote with a single total and a vague scope line gives a contractor room to charge whatever they want at the end. An allowance that isn’t on paper is a surprise waiting for a date. The safe version of a contract names every material, every quantity, and every price, and it specifies in writing how a price change will be handled if something unforeseen comes up.
Contract language that should concern you:
- “Prices subject to change based on materials availability.” Without a cap or a written change order requirement, that’s an open check.
- Line items listed as “allowance” with no dollar amount. The number needs to be spelled out.
- “Final price to be determined upon completion.” The final price should be determined by the signed scope, not a surprise at the door.
- No written change-order process. Any price change should arrive on paper and be signed by you before the crew does the extra work.
The good version of a contract looks like this: line-item pricing for materials and labor, named brands and product codes for the fencing, a fixed allowance for anything variable, and a written change-order process for anything that comes up mid-job. That last point matters most. Scope in writing, allowances in writing, change orders in writing. Anything less is a contract that protects the contractor’s margin, not your wallet. For more on how we handle scope on remodeling and construction jobs, see our Barrett & Sons Construction Plano home page.
Warning Sign 4: Bait-and-Switch on Materials
You get a quote that lists premium western red cedar or commercial-grade vinyl, and on install day a crew shows up with builder-grade panels that look similar from twenty feet away. The price difference between a premium branded fence and a thinner no-name product can run 25% to 40% per linear foot, and the delivered product may not meet the spec that was quoted. This is one of the most common bait-and-switch moves in the business.
How to make sure the quoted material is the delivered material, before install day:
- Insist on product names and model numbers in the written scope, not just “cedar fence” or “6-foot privacy fence.”
- Ask for the brand of panels, posts, caps, and gate hardware. If the crew uses brands like ViewLux, Barrette, or Master Halco, those are brands you can look up before signing.
- Verify the brand and color on the delivery ticket when materials arrive at your property.
- Walk the property on day one, before the crew starts building, to confirm the pallets are what you paid for.
- Hold the final payment until the installed fence matches the signed scope, brand names included.
Material substitutions can be legitimate, but only if the swap is documented in a written change order signed by the homeowner. A quote you can look up, a contract with brand names, and a delivery ticket you can check are the three things that close the bait-and-switch window.
Warning Sign 5: Proof of Insurance That Isn’t Real Proof
A photo of an insurance card on a phone screen proves nothing. A real certificate of insurance comes directly from the insurer, names the policyholder (the contractor’s business entity), lists general liability coverage, and includes workers’ compensation if the crew is made up of employees instead of subcontracted labor. If a crew member gets hurt on your property and the contractor doesn’t have workers’ comp, that worker’s medical bill can become an uninsured claim against your homeowner policy.
What to ask for before the fence crew shows up:
- A current certificate of insurance emailed directly from the insurance agent or the insurer, not a photo of a card.
- General liability limits high enough to cover a property-damage claim from a hit utility line or a neighbor’s fence, not a policy that caps at a few thousand dollars.
- Workers’ compensation coverage if the crew is on payroll rather than subcontracted, and a written confirmation that it’s active during the job.
- The contractor’s business name matching the name on the certificate, and matching the name on your written contract.
A certificate that lists an individual’s name instead of a licensed business entity is a reason to ask more questions. In our experience, the crews that get squirmy about insurance paperwork are the same crews that go mum on permits.
Warning Sign 6: Post-Hole Depth and Concrete Curing in North Texas Clay
Fence failures in North Texas almost always come back to the same root cause: shallow holes. The shrink-swell clay soils in Plano and the surrounding communities move dramatically between wet springs and dry summers. A post set in a hole 18 inches deep will lean within 18 to 24 months. A post set in a hole 30 to 36 inches deep, sitting in properly cured concrete, will not. The difference is about an hour of extra labor per post, and it’s the single easiest corner to cut.
What to watch for when the crew starts digging:
- Hole depth marked on the post before digging. A legitimate crew measures, and the measurement is visible on the post itself.
- Hole width at three times the post diameter. A 4×4 post wants a 12-inch-wide hole. A 5×5 post wants 15 inches.
- Gravel at the bottom of the hole before the concrete. That’s drainage, not decoration.
- Concrete mixed to spec, not watered down to stretch a bag. Ask what the crew uses and why.
- A minimum 24-hour cure before any panels or rails go up. Sometimes 48 hours in cool weather. A crew that’s building on muddy concrete the same afternoon is setting you up for a lean.
In Plano, a properly set post in clay will outlast a poorly set post by a decade or more. If the crew is halfway through installing panels before the concrete on the first run has cured, that’s a warning sign about the whole job.
Warning Sign 7: Cash-Only Deposits and Payment Schedules That Protect the Wrong Person
Deposits should come with a written contract, a payment schedule that ties each payment to a completed stage, and a paper trail. A contractor who wants 50% or more of the total upfront, in cash, before any materials have been delivered or any work started, is telling you exactly how much they trust the job to go well. Deposits in the 20% to 30% range are typical for fence work in the Plano market. A larger ask, or a walk-away-if-you-don’t-pay-cash rule, is a sign of a contractor who isn’t planning to be around for the finish.
A payment schedule that protects you looks like this:
- A deposit that covers materials but doesn’t exceed roughly 30% of the total, paid by check or card with a receipt.
- A second payment when posts are set and inspected against the signed scope.
- A final payment only after the fence is complete, cleaned up, and matches the contract.
- No cash payment without a written receipt that names the job and the amount.
A contractor who’s proud of the work wants you to hold the final payment until the work is done. A contractor who wants all the money front-loaded is telling you something too.
Common Mistakes to Avoid
- Skipping the utility locate because the start date is convenient. It saves two days. It can cost you a ten-thousand-dollar excavation repair if a gas or water line gets hit.
- Accepting a verbal quote without a written scope. A spoken “we’ll get it done for around $8,000” is unenforceable. If the total creeps to $11,000 by the end, you have no paper trail.
- Not confirming the permit before work starts. In Plano, a fence installed without a permit can become a problem the homeowner has to resolve at their own cost.
- Not asking for a certificate of insurance from the insurer directly. A photo of a card is not a certificate and doesn’t list coverage limits or the policyholder’s legal name.
- Ignoring the post-hole depth the crew is digging. If the holes are 18 inches deep in clay soil, the fence will lean. Every time.
- Paying the final bill before walking the fence line against the signed scope. Walk the fence, count the posts, check the gate hardware. Then pay.
- Letting the crew start before the concrete has cured. In North Texas clay, a crew that’s hanging panels the same afternoon is guaranteeing a future problem.
See the difference
Before
After
Before
After
Before
AfterWhen to Call a Professional

Call a professional before you sign if any of these are true: the quote is verbal, the deposit is cash-only or over 30%, the contractor won’t name the brands being installed, the crew offers to start tomorrow without a utility locate, or someone shows up without a certificate of insurance from the insurer. Also call a professional if you’re pricing a fence longer than roughly 100 linear feet, if your property line touches an easement, or if you’re not sure whether the previous fence hit the setback requirements in Plano. Those are the areas where an error gets expensive and slow to fix. Barrett & Sons Construction Plano offers free estimates in Plano, call (877) 382-4108.
Frequently Asked Questions
Yes, most residential fence installations in Plano require a permit, and any fence built without one puts the code-compliance risk on the homeowner. Plano enforces height limits, setback from property lines, and placement rules near easements, and the permit is what puts a city inspector’s eyes on the work. Before you sign anything, ask the contractor for the permit number and confirm it was pulled. Call (877) 382-4108 for a free estimate that includes permit scope in writing.
Fence posts in Plano and the surrounding clay soils should be set 30 to 36 inches deep, in a hole roughly three times the post’s diameter, with gravel at the bottom and concrete mixed to spec. Shallow 18-inch holes are the single biggest cause of leaning fences in this market. Any crew that skips depth or pours a watery mix is cutting a corner you’ll pay for in about 18 months. Call us for a free estimate if you want the install walked through line by line.
A standard 6-foot cedar privacy fence in Plano typically runs $32 to $55 per linear foot installed, while a premium composite or vinyl fence runs $55 to $90 per linear foot, depending on brand, post spacing, and gate hardware. A 150-foot yard usually lands between $4,800 and $8,200 for cedar with a walk gate, before permit fees. Prices depend heavily on the material brand and the post depth, so ask for line-item pricing. Call (877) 382-4108 for a written estimate, free.
It shouldn’t, and if it does, the change should arrive as a written change order you sign before the crew does the extra work. Any contractor who reserves the right to adjust the final price based on “materials” or “final measurement” without a documented change order has language that lets them charge whatever they want at the end. Read the change-order clause before you sign. Call (877) 382-4108 if you want a contract reviewed against a scope.
The right answer is that the written scope should name specific product brands and model numbers before work starts, not after. In our experience, brands like ViewLux for premium vinyl, Barrette for fence panels and gate frames, and Master Halco for ornamental and gate hardware set a verifiable standard you can look up. If a quote just says “premium cedar” or “commercial vinyl” without a brand, ask before you sign. Call (877) 382-4108 for a brand-by-brand quote, free.
Ask for a current certificate of insurance emailed directly from the insurer or the agent, not a photo of a card. The certificate should name the contractor’s business entity as the policyholder, list general liability coverage limits, and include workers’ compensation if the crew is on payroll. The business name on the certificate should match the name on your written contract. Call (877) 382-4108 if you want to compare certificate paperwork before you hire.
The Bottom Line
The worst fence contractors announce themselves with paperwork, not with bad lumber. Vague scopes, cash-only deposits, no utility locate, no permit, no certificate of insurance from the insurer, and post holes you can’t measure are all the same signal: the contractor plans to cut corners and hope you don’t notice until the fence leans. The good contractors will slow down and put every number, brand, and permit on paper before a shovel touches the yard. If a contractor won’t do that, don’t hire them. If you’re pricing a fence in Plano, call (877) 382-4108 for a free estimate.
If your fence job is part of a bigger yard project, our team also handles Driveway & Pavers in Plano and Home Additions & ADU in Plano. Every scope, allowance, and price change on our jobs lands in writing before work starts, every eligible job gets permits pulled and inspections signed, and every completed job is backed by the written 90-Day Done Right Promise. Our technicians have up to 28 years of experience, and our crews carry the Barrett & Sons name on every visit. A live person answers our phone 24 hours a day, 7 days a week, not a voicemail box. Standing offers include $40 Off Any Repair Over $200, Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and a permanent 10% Senior & Veteran discount. Reach out today for a free estimate.
Written by the team at Barrett & Sons Construction Plano.


