







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Plano Homeowners Choose Owens Corning Construction
We provide independent Owens Corning roofing and insulation service in Plano, TX. Barrett & Sons Construction works on the Owens Corning residential systems that matter most in North Texas: Duration®, Oakridge®, and Berkshire® shingles, plus the underlayments and ventilation components that decide whether those shingles actually last. We’re not affiliated with or authorized by Owens Corning; we’re an independent local contractor that knows the product line cold.
Plano is a built-out suburb. Almost everything we do here is renovation, repair, and rebuild layered over 1970s through 1990s tract housing, not new construction on the fringe. That matters for Owens Corning roofs, because most of the shingles we service in Plano are 15 to 30 years old and facing the same two forces: spring hail and long, brutal summers. Call (877) 382-4108 for a free estimate.
Why Trust Barrett & Sons Construction Plano for Your Owens Corning Construction?

Our technicians have up to 28 years of experience, and a big share of that has been spent on Owens Corning systems. We stay current with Owens Corning’s published installation guidelines, because shingle performance is a system question, not a product question. The right shingle installed over the wrong underlayment, nailed to the wrong pattern, over an attic that can’t breathe, will fail ahead of schedule every time. We install Owens Corning OEM accessories – starter strips, hip and ridge caps, underlayments – so the system stays compatible and the warranty stays intact.
We also know what Plano’s climate does to roofs. Hail drives exterior replacement here, and our summers put asphalt through thermal cycling that shows up as curled edges, granule loss, and cracks. When we quote a repair, we assess the whole roof before we touch anything: age, deck condition, ventilation, and whether a patch will hold or just buy you a year.
Barrett & Sons is owner-operated. Tom Barrett and his sons run the crews, and we’ve been proudly serving local communities for over 29 years, founded in 1998. Tom publishes his name, address, and license number – look it up before you sign anything. Every eligible job gets permits pulled and inspections signed, and every completed job carries the written 90-Day Done Right Promise. If it’s not done right, one call brings Tom back.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Owens Corning Construction Problems We Fix in Plano
Roofs fail for reasons you can usually trace. Here are the Owens Corning issues we see most often around Plano.
- Duration® thermal cracking and granule loss. Duration® shingles, including Duration® Premium Cool and the Designer colors, can crack and shed granules on south- and west-facing slopes when attic ventilation is inadequate. Our summers push attic temperatures high enough that the shingle cooks from both sides, and the sun-facing planes age years faster than the rest of the roof. It usually shows up as granules in the gutters after a hot stretch.
- Oakridge® wind uplift at rake edges. Oakridge® shingles are prone to lifting at the rake if the starter strip isn’t Owens Corning’s matching product or was nailed improperly. A non-matching or misnailed starter strip is a common shortcut, and it’s the first thing that goes in a spring gust front.
- Berkshire® scuffing and lot-to-lot color variation. The Berkshire® Collection can show premature scuffing and visible color differences when mixed production lots end up on the same roof plane. It’s not a defect so much as a batch-matching problem, and it’s obvious from the curb once the light hits it.
- RhinoRoof® underlayment wrinkling. Owens Corning underlayments like RhinoRoof® can wrinkle and telegraph through thinner shingles if they aren’t allowed to relax before installation in hot weather. On a July install in Plano, that step gets rushed and the wrinkles show up as ridges in the finished roof.
- Hail bruising that isn’t obvious from the ground. After a spring hailstorm, Oakridge® and Duration® shingles can take impact damage that looks like normal wear from the driveway. We check for soft spots and bruised mat, because the difference between a hail claim and a wear claim comes down to documentation.
Owens Corning Parts & Our Repair-vs-Replace Approach

We always use Owens Corning OEM accessories – starter strips, hip and ridge caps, underlayments – to keep the system matched and the warranty eligible. We don’t carry local stock, so parts are sourced per job. That means we can usually get the right OEM component rather than force-fitting whatever a warehouse happens to have.
For repairs, we source OEM shingles when they’re available. If the exact match has been discontinued, we’ll recommend a qualified aftermarket match for a small patch, but for a large area we advise full replacement instead of patching toward premature failure. We give you an honest read on the roof’s age and overall condition, and we put the scope in writing before anything moves. Every price change is a written change order, because an allowance that isn’t on paper is a surprise waiting for a date.
Call (877) 382-4108 and we’ll take a look before you spend a dollar.
Our Owens Corning Service Process – Step by Step
- 1
Diagnosis. We inspect the roof and the attic together – shingle condition, deck, and ventilation – because an Owens Corning system fails at whichever point is weakest. We check for the specific Duration®, Oakridge®, and Berkshire® failure patterns above.
- 2
Written scope. You get line-item pricing and a clear repair-or-replace recommendation before any work starts. No verbal estimates that change at the door.
- 3
Repair or install. OEM Owens Corning shingles and accessories, installed to Owens Corning’s published guidelines, including proper nailing pattern and underlayment relaxation in heat.
- 4
Ventilation check. We verify intake and exhaust balance so the new shingles aren’t set up to fail the way the old ones did.
- 5
Warranty and walkthrough. Permits pulled, inspection signed where eligible, and the 90-Day Done Right Promise on the job.
See the difference
Before
After
Before
After
Before
AfterOwens Corning Products We Service & Install in Plano
We work across the Owens Corning residential line most Plano homes actually use. That includes Duration® Series shingles, including Duration® Premium Cool and the Designer colors, Oakridge® Series shingles, and the Berkshire® Collection. We also install and service Owens Corning underlayments like RhinoRoof® and R-13 and R-15 fiberglass insulation batts. If you’re repairing, replacing, or rebuilding after storm damage, we handle the full roof system, from deck to ridge cap. Roof repairs in Plano typically run $400 – $1,800, and full replacements run $8,000 – $20,000.
We Also Service These Brands
We’re not a single-brand shop. Alongside Owens Corning, we service KraftMaid cabinetry, Kohler fixtures, GAF roofing, and PGT windows and doors, plus the other premium brands across our trades. That matters when a project touches more than the roof, because you’re not handing the job to three contractors who never talk to each other.
FAQs – Owens Corning Construction Service in Plano

No. We’re an independent Owens Corning service provider, not an authorized or affiliated Owens Corning contractor. We follow Owens Corning’s published installation guidelines and use OEM Owens Corning materials, but we don’t represent the manufacturer. Call (877) 382-4108 for a free estimate.
Yes. We use Owens Corning OEM accessories – starter strips, hip and ridge caps, and underlayments – to keep the roof system matched and the warranty eligible. For repairs, we source OEM shingles when available, and if a match is discontinued we’ll be straight with you about whether a patch makes sense or a full replacement does.
Most roof repairs finish in a day. A full Owens Corning roof replacement typically runs one to three days depending on roof size, deck condition, and weather. We schedule around North Texas heat and storm season, and we tell you the timeline in the written scope before we start.
We cover the Duration® Series, including Duration® Premium Cool and the Designer colors, the Oakridge® Series, the Berkshire® Collection, RhinoRoof® underlayments, and R-13 and R-15 fiberglass insulation batts. If you’re unsure which series is on your Plano roof, we’ll identify it during the inspection.
Not if it’s done right. Using OEM Owens Corning accessories, following the published installation guidelines, and keeping attic ventilation within Owens Corning’s specified requirements are what keep a warranty eligible. Improper nailing, a mismatched starter strip, or inadequate ventilation are the things that create coverage problems. We handle all three as part of the job. Call (877) 382-4108 to schedule a free estimate.
It depends on the work. Here’s what we typically see in Plano:
| Service | Typical Plano Range |
|---|---|
| Roof Repair | $400 – $1,800 |
| Roof Replacement | $8,000 – $20,000 |
| Emergency & Storm Damage | $400 – $1,800 |
Call (877) 382-4108 for an exact quote – estimates are free. We also offer $40 Off Any Repair Over $200, a Free Second Opinion on Any Written Estimate, No Trip Charge Inside the County, and a permanent 10% Senior & Veteran discount.
Book Your Owens Corning Service in Plano, TX
If you’ve got an Owens Corning roof that’s showing its age, hailing damage, or venting poorly, call Barrett & Sons Construction Plano at (877) 382-4108. We’ll walk the roof, check the attic, and give you a written assessment before any work begins. Estimates are free, permits get pulled, and the 90-Day Done Right Promise is on the contract.
Written by the team at Barrett & Sons Construction.












