







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Construction in Farmers Branch, TX
Windows and doors are what Farmers Branch homeowners call us about first, and the reason is the housing stock: most of this city was built between 1955 and 1975, and the original single-pane aluminum units on those ranch houses have had a long run. Farmers Branch is a built-out inner-ring Dallas suburb, so nearly every job here is a rebuild or a retrofit on an existing lot rather than new ground-up work. That changes the sequencing, the measurements, and the permits. When you’re ready to price a project, call (877) 382-4108 and we’ll put the scope in writing before anything else happens.
Why Farmers Branch Homes Are Different
Farmers Branch is unusual among DFW suburbs in two ways that affect construction directly. First, the city runs its own municipal electric and water utility, which means utility coordination and inspection sequencing don’t follow the same path as a Dallas or Carrollton job. Second, there’s almost no greenfield land left, so the work is tear-downs and rebuilds of 1950s-60s ranch houses on mature lots – heavy tree canopy, original slab foundations, and aging utility stub-outs that complicate any demolition plan.
Then there’s the ground. North Texas blackland clay shrinks and swells hard with wet-dry cycles, so foundations, flatwork, and pier-and-beam remediation come up on a large share of Farmers Branch projects. Along the Valwood and Brookhaven areas, many original ranch lots carry rear-lot or alley utility easements, and the city’s utility records only partially map the original clay sewer lines and cast-iron or galvanized plumbing underneath. We hit those on rebuilds routinely. Knowing they’re there before the saw comes out is most of the battle.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Main Farmers Branch Services
These are the two projects Farmers Branch homeowners ask about most often, and each has its own page where we go deeper on scope, cost, and local conditions.
Driveway & Pavers in Farmers Branch
Driveway work in Farmers Branch runs into two local realities: mature trees whose roots have lifted and cracked decades-old concrete, and clay soil that heaves a pour that wasn’t properly base-prepped. On 75234 lots we usually find original 1960s flatwork that’s beyond patching. Replacement means tearing out to the base, re-grading for drainage, and building up compacted aggregate before a single paver or yard of concrete goes down. We pull the right-of-way permit when the apron meets the street. See Driveway & Pavers in Farmers Branch for the full scope and line-item pricing.

Fence Installation in Farmers Branch
Fence jobs here are shaped by the same clay and the same tree canopy. Posts set in blackland clay need deeper footings and proper drainage or they’ll lean within a few seasons. In the older ranch neighborhoods, we also measure carefully against platted lot lines, because fences built years ago on adjacent properties often sit a foot or two off the survey. On corner lots along the Valwood corridor, sight-line and setback rules matter. We verify property lines and HOA fence standards before we set a single post. Fence Installation in Farmers Branch covers materials, heights, and cost.

Home Additions & ADU in Farmers Branch
Additions in Farmers Branch are almost always vertical or rear-yard projects on lots that are already fully built out, and that’s where the local complications live. Rear-lot and alley easements constrain how far back you can build. Original utility stubs run under yards in places the city maps only partially, so we locate before we dig. Farmers Branch permits and inspects heavily, which is fine by us: the permit inspector works for you, not for me. We handle the plat research, setbacks, and inspection sequence as part of the job. Details are on our Home Additions & ADU in Farmers Branch page.

Bathroom Remodeling in Farmers Branch
Bathroom remodels in this city almost always open a wall and find galvanized supply lines or cast-iron drains that have been quietly failing since the Eisenhower years. We plan for that possibility in the scope rather than discovering it mid-demo. The other local factor is the slab: on a 1950s ranch, moving a drain for a tub-to-shower conversion means cutting concrete and re-pouring with the right slope, which affects both schedule and price. Tile and fixture allowances go in writing before we start. See Bathroom Remodeling in Farmers Branch.
Kitchen Remodeling in Farmers Branch
Kitchen work in Farmers Branch ranch homes usually means opening a wall between the kitchen and a den that was never designed to be open, which means a beam and often a post. We check the framing and get a structural answer before we promise an open plan. Cabinet runs in these houses are short by current standards, so layout matters more than square footage. We install KraftMaid and Cambria, and every allowance arrives on paper: the allowance that isn’t on paper is a surprise waiting for a date. Full detail is on our Kitchen Remodeling in Farmers Branch page.
Windows & Doors in Farmers Branch

If your Farmers Branch house went up in the 1950s or 60s, the windows in it now are almost certainly original single-pane aluminum, and they’re doing three things badly: leaking conditioned air, fogging or failing at the seal, and letting in more of the North Texas summer than any cooling system should have to fight. Farmers Branch permits and inspects heavily, so replacement work here gets done to code with the right egress, tempered glass, and inspection sign-off. We install Andersen and Marvin units, which you can look up rather than take on faith, and Windows & Doors covers the full line of what we offer.
Window Replacement
Signs you need it
You need it when the frames are aluminum and cold to the touch in winter, when condensation collects on the inside of the glass, when one sash won’t latch, or when you can feel air moving at the frame on a windy day.
What it costs in Farmers Branch
Standard window replacement on a Farmers Branch ranch house typically runs $4,500 – $15,000 depending on the number of openings, while impact-rated units run $8,000 – $25,000.
How we do it
We measure every opening, confirm egress and tempered-glass requirements, order the units, then remove and reinstall with new flashing and sealant, and walk the job with the city inspector before we call it done.
Door Installation
Signs you need it
You need it when the front or back door no longer sits square in the frame, when the threshold leaks in a hard rain, or when the slab has moved enough that the door drags at the bottom corner.
What it costs in Farmers Branch
Door installation is priced with the window work on these jobs, within the $4,500 – $15,000 window replacement range for the standard units and $8,000 – $25,000 when impact-rated doors and windows are specified together.
How we do it
We check the opening for square and plumb, shim and set the new door, seal and flash the perimeter, and confirm the threshold and strike align before warranty walkthrough.
What Windows & Doors Costs in Farmers Branch
| Item | Typical range in Farmers Branch |
|---|---|
| Window replacement (whole house, standard) | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
| Window and door replacement packaged together | $4,500 – $25,000 |
Do Farmers Branch windows need to be impact-rated?
Impact-rated glazing isn’t required everywhere in Farmers Branch, but it’s a smart choice on a hail-prone North Texas roof line and it cuts summer cooling load. We’ll tell you honestly which openings benefit most. Call (877) 382-4108 for a free estimate.
How long does a whole-house window replacement take?
Most Farmers Branch whole-house replacements run two to three working days once the units are on site, depending on how many openings and whether the frames are being reframed. Orders take longer than installation. Call (877) 382-4108 and we’ll lay out the timeline in writing.
Roofing in Farmers Branch

Farmers Branch roofs take a beating from two directions: spring hail coming across the blackland prairie and summer heat that cooks asphalt shingles through twenty-plus years. On the 1950s-70s ranch houses that make up most of this city, the original roof decking and ventilation were sized for a different era, so a straight overlay isn’t the answer when a deck has soft spots. We install GAF and CertainTeed systems and put the scope in writing first. Our Roofing page has the full picture.
Roof Repair
Signs you need it
You need it after a hail event, when you find granules in the gutters, a dark stain on a ceiling, or a flashing detail that’s pulled loose at a chimney or vent boot.
What it costs in Farmers Branch
Roof repair here typically runs $400 – $1,800 for shingle work, while tile roof repair on a specialized roof runs $600 – $2,500.
How we do it
We get on the roof and photograph what’s actually there, match the shingle or tile, replace the failed section and flashing, then seal and verify with the homeowner before we leave.
Roof Replacement & Installation
Signs you need it
You need it when the roof is past twenty years, when the deck sags or feels soft underfoot, when leaks recur in multiple spots, or when an insurance adjuster has totaled the shingles after hail.
What it costs in Farmers Branch
A full roof replacement here typically runs $8,000 – $20,000 depending on square footage, pitch, and decking repairs, while metal roofing runs $15,000 – $40,000.
How we do it
We tear off to the deck, replace any soft sheathing, install ice-and-water and underlayment, set the new shingles or panels, and finish with ridge vent and flashing before the city inspection.
What Roofing Costs in Farmers Branch
| Item | Typical range in Farmers Branch |
|---|---|
| Roof repair | $400 – $1,800 |
| Roof replacement | $8,000 – $20,000 |
| Metal roof installation | $15,000 – $40,000 |
Does hail damage mean I need a whole new roof in Farmers Branch?
Not always. Hail can bruise a few shingles or total a whole field depending on size and age. We inspect and document what we find so you can make an informed call with your insurer. Call (877) 382-4108 for a free roof inspection.
How long does a roof replacement take in Farmers Branch?
Most residential tear-offs here run one to three working days once the material and dumpster are on site, weather permitting. Spring hail season and DFW rain can push the schedule. Call (877) 382-4108 to get a written timeline.
Brands We Service in Farmers Branch
We install and work alongside the brands homeowners actually research: Andersen and Marvin on windows and doors, GAF and CertainTeed on roofing, KraftMaid and Cambria in kitchens, Belgard and Techo-Bloc on hardscape. We don’t stock parts locally, but standard orders usually arrive within a week or two. Ask us about any brand on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Construction in Farmers Branch, TX
| Service | Typical range in Farmers Branch |
|---|---|
| Window replacement | $4,500 – $15,000 |
| Impact window installation | $8,000 – $25,000 |
| Roof repair | $400 – $1,800 |
| Roof replacement | $8,000 – $20,000 |
| Metal roof installation | $15,000 – $40,000 |
| Tile roof repair | $600 – $2,500 |
| Kitchen remodel | $14,000 – $45,000 |
| Bathroom remodel | $9,000 – $28,000 |
| Home addition | $45,000 – $130,000 |
| ADU construction | $90,000 – $220,000 |
What pushes price up in Farmers Branch is almost always what’s behind the wall or under the slab: failing cast-iron drains, galvanized supply lines, soft roof decking, or clay soil that requires more base work than the books allow. We price the job with a written scope, written allowances, and written change orders before any scope shift touches the work, so the number you sign is the number you pay unless you approve a change in writing.
Neighborhoods We Serve in Farmers Branch
We work throughout Farmers Branch and ZIP code 75234, from the older ranch blocks off Valwood and Brookhaven to the rebuilds going up along the I-35E and LBJ corridor. Every job gets the same approach: scope in writing, permits pulled, inspections signed. Because Farmers Branch is small and we’re nearby, scheduling is straightforward for the neighborhoods below.
- Brookhaven
- Valwood
- Farmers Branch Station area
- Mercer Crossing
- Oran Good / Rawhide Creek area
Service Area – Cities Near Farmers Branch
Farmers Branch sits inside a tight ring of suburbs, and we regularly work in the towns next door. If your project is in Addison, TX, Carrollton, TX, Coppell, TX, or University Park, TX, the local housing stock and permit rules differ from Farmers Branch but the standards don’t. Call us and we’ll tell you straight whether we’re the right fit for the job in your city. If we’re not, we’ll say so.
Serving Farmers Branch, TX – Our Local Coverage Area
We serve Farmers Branch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Construction in Farmers Branch
Most Farmers Branch estimates get scheduled within a few days of your call. Farmers Branch is small enough that we can look at two or three projects in one trip, so scheduling is usually quick. Call (877) 382-4108 to set up a free estimate.
Yes. Farmers Branch permits and inspects heavily, and every eligible job we do gets the permits pulled and the inspections signed. That’s not optional in this city, and it’s not optional for us. The permit inspector works for you, not for us.
Yes, all of Farmers Branch and ZIP 75234 fall inside our service area, along with the surrounding cities we list above. If you’re not sure whether your address counts, call (877) 382-4108 and we’ll confirm on the spot.
Every scope, allowance, and price change arrives in writing before work moves, and every completed job is backed by the written 90-Day Done Right Promise. We answer the phone live around the clock. Call (877) 382-4108 for a free estimate on your Farmers Branch project, and we’ll put the plan in writing so you know exactly what you’re buying.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local construction pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Farmers Branch Customers Say
"He pulled every permit and had every inspection signed off. The last contractor we used told us permits were optional and I have been paying for that ever since."
- Redmond Cavanaugh"His sons run the crews and they were in our house for four months. Not once did I feel I had to be home to keep an eye on things."
- Camila Fuentes"Addition over the garage matched the original roofline and brickwork so closely that visitors do not realise it was added. He tracked down the closest brick he could find rather than settling."
- Gideon Stroud












